2165 Turntable

Product enquiry for 2165 Turntable

More InfoQuote

ETS-Lindgren’s Model 2165 LoProTM Turntable is ideal for today’s EMC test applications where height is a concern and installation options may be limited.

The LoPro Turntable can be used with the popular ETS-Lindgren EMCenter™ with EMControl™ plug-in card or separate IR remote control.

With a top almost flush to the ground plane, excavating a pit to bury a power train assembly is not necessary. LoPro™ can be used at indoor or outdoor (if the turntable is properly protected from rain, moisture, etc.) sites where traditional turntables are impractical or impossible to install. In chambers, antenna scan height is maximized because space robbing sub floors are not required. The LoPro’s minimal height and ABS/PVC construction is virtually RF invisible, so site attenuation characteristics are virtually unchanged. The optional drive shaft can be used for increased RF isolation of the shielded motor if desired.

Electrical Specifications

Max RPM: 2.5

Phase: Single

Voltage: 208/230 VAC
Control Unit (Sold Separately): EMCenter with EMControl


Physical Specifications

Turntable Diameter: 1.2 m (3.94 ft)
Nominal Height: 5 cm (1.97 in)

Nominal Load Capacity:  272 kg (600 lb)

Nominal Max Diameter: 1.2 m (3.94 ft)
Nominal Turntable Platform Height: 5 cm (1.97 in)
Top Construction: One-piece PVC with ABS Surface


Key Features

  • Fibre optic control lines eliminate RF noise
  • Variable speed motor
  • Ultra-low profile, 5cm

Application Notes