Electromagnetic Compatibility (EMC) /
EMC Test Receivers
Meeting electromagnetic interference (EMC) compliance regulations is a critical step in bringing products to market quickly. Wherever you are in the product development cycle, MDL Technologies has an EMI measurement solution for you. To avoid costly delays that can result from failed compliance testing, PMM's EMC Test Receivers allows you to perform pre-compliance measurements and diagnostic evaluation of your designs - so you can find and fix problems before they enter the test chamber. Conduct full standards-compliant testing in accordance with CISPR and MIL-STD with the selected Receivers. For a complete EMC test solution, MDL Technologies provide a single point of contact for you to combine the EMC Test Receivers with probes, chambers, antennas, software, and more.
-
PMM 7010 Series Pre-compliance EMI Reciever. All measurements performed by the 7010 are according to the most accepted standards like: IEC, CISPR, EN...FIND OUT MORE -
The PMM 9010 Series is a powerful EMI receiver, fully CISPR 16-1-1, to measure conducted and radiated interferences from 10 Hz up to 30 MHz, or even...FIND OUT MORE -
The 9010/03P is an EMI CISPR receiver to measure conducted and radiated interferences from 10 Hz to 300 MHz. The 9010/03P is Full Compliance up to 30...FIND OUT MORE -
The 9010/30P is an EMI CISPR Receiver to measure conducted and radiated interferences from 10 Hz 3 GHz The 9010/30P is Full Compliance up to 30 MHz...FIND OUT MORE -
The 9010/60P is an EMI CISPR receiver to measure conducted and radiated interferences from 10 Hz to 300 MHz The 9010/60P is Full Compliance up to 30...FIND OUT MORE
-
The PMM Click4E Click Meter when used with the PMM 9010F FFT RF receiver with relevant software key provides a four channel Click Analyser fully...FIND OUT MORE -
The PMM Switching Operation Box when used with the PMM 9010F FFT RF receiver with relevant software key provides a single channel Click Analyser...FIND OUT MORE -
CISPR detectors as the Q-Peak, C-RMS and C-AVG detectors are characterized by a long settling time: measurements must be performed with a long...FIND OUT MORE
Visit us at the @batterytechexpo on stand B12 today to find out more about our Hioki Battery / Power Electronic Tes… https://t.co/zM7TE5iAp9
