-
The RFSD-100 sliding doors were designed to meet the highest shielding requirements. The patented labyrinth sealing construction ensures light and...
FIND OUT MORE
-
The special large EUROSHIELD SRFSD-100 sliding doors are designed for applications in the reverb chambers and partial discharge rooms and according...
FIND OUT MORE
-
ETS-Lindgren FACT™ 10 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test...
FIND OUT MORE
-
ETS-Lindgren’s FACT™ 3 Chambers offer semi-anechoic radiated emissions (RE) and fully anechoic radiated immunity (RI) compliance test...
FIND OUT MORE
-
ETS-Lindgren’s FACT™ 25 CISPR Chambers offer semi-anechoic radiated emissions (RE) compliance testing over a frequency range of 70 MHz...
FIND OUT MORE
-
ETS-Lindgren FACT™ 5 Chambers offer the ability to perform radiated emissions testing at a 5 meter distance. While not required by any current...
FIND OUT MORE
-
ETS-Lindgren’s Filter Foam/Vent Absorber series microwave absorber is similar in appearance and geometry to conventional ETS-Lindgren pyramidal...
FIND OUT MORE
-
ETS-Lindgren’s Flat Laminate Absorber, a moderate performance broadband microwave absorber is a graded dielectric material that has been widely...
FIND OUT MORE
-
The FP-COMB 32 coupling/decoupling network – for Surge Combination Wave, Ring Wave and EFT/Burst – is fully compliant with the standard...
FIND OUT MORE
-
ETS-Lindgren’s FerroSorb™ FS-1001 is a numerically optimized hybrid that combines high performance carbon-loaded foam absorber with...
FIND OUT MORE
-
ETS-LINDGREN’S FERROSORB FS-1001H is a numerically optimized hybrid that combines high performance carbon-loaded foam absorber with...
FIND OUT MORE
-
FS-1250H is a numerically optimized hybrid that combines high performance carbon-loaded foam absorber with precision-manufactured ferrite tile, and...
FIND OUT MORE
-
ETS-Lindgren’s FerroSorb™ FS-1500H is a numerically optimized hybrid that combines high performance carbon-loaded foam absorber with...
FIND OUT MORE
-
The FS-400 High Performance Hybrid Ferrite Tile Absorber is designed for applications in three meter and SpaceSaverTM EMC...
FIND OUT MORE
-
ETS-Lindgren FerroSorb™ FS-600H is the latest evolution in low profile anechoic technology. Specially designed for three and five meter EMC...
FIND OUT MORE
-
FerroSorb FS-980 High Performance Hybrid Ferrite Tile Polyurethane Dielectric Absorber is the first commercially available absorber to meet the...
FIND OUT MORE
-
ETS-LINDGREN’S FT-1500 and FT-1500C combine precision machined ferrite tile with a tuned dielectric backing layer to create a high performance,...
FIND OUT MORE
-
The new Haefely AXOS5 Compact Immunity Test System integrates all of the best features of our stand alone test systems into one single economic...
FIND OUT MORE
-
Frequency: 2450 MHz The HI-1501 is ETS- Lindgren’s most popular Microwave Oven Leakage Meter. The device provides accuracy and portability for...
FIND OUT MORE
-
Frequency: 915 MHz & 2450 MHz The model HI-1600 Microwave Meter measures microwave leakage from microwave devices operating at 2450 MHz or 915...
FIND OUT MORE
-
Frequency: 2450 MHz The HI-1710A combines the proven and reliable diode sensing technology of the Holaday Microwave Survey Meters with the digital...
FIND OUT MORE
-
Frequency: 2450 MHz A durable, compact and portable instrument, the HI-1801 meter is especially suited to appliance service applications. The CHECK...
FIND OUT MORE
-
Frequency Range: Depends on Probe Selected A simple solution for basic RF safety measurements, the HI-2200 RF Survey Meter provides a compact...
FIND OUT MORE
-
Frequency: 2450 MHz The ETS Lindgren HI-2602 Interlock Monitor provides continuous surveillance of microwave fields for protection of personnel and...
FIND OUT MORE
-
Frequency: 2450 MHz The ETS Lindgren HI-2790B Calibration Comparison System complies with US Government (CDRH/FDA) requirements for evaluating...
FIND OUT MORE
-
Frequency Range: 30 Hz – 2000 Hz The HI-3604 ELF Survey Meter is designed to evaluate both electric and magnetic fields associated with 50/60Hz...
FIND OUT MORE
-
Frequency Range: 5 (30) Hz – 2000 Hz The ETS-Lindgren HI-3624(A) ELF Magnetic Field Survey Meter is an affordable, easy to use magnetic meter for...
FIND OUT MORE
-
Frequency Range: 5 Hz – 200 Hz The HI-3627’s remote sensor and meter make quick work of determining ELF magnetic field distributions in various...
FIND OUT MORE
-
Frequency Range: 5 Hz – 400 kHz Meets Swedish MPR Band I and II Requirements. Full ELF and VLF capability to the Swedish MPR and the IEEE 1140 test...
FIND OUT MORE
-
Frequency Range: 9 kHz – 70 MHz The HI-3702 Induced Current Meter measures RF induced body currents using a clamp-on current sensor, sized for a...
FIND OUT MORE
-
The HI-4413P and ProbeView II” software provides extensive data gathering and display options for any fibre optically coupled Holaday probe. It...
FIND OUT MORE
-
The HI-4413USB Fibre to USB Converter is an economical way to collect and display data from all of the ETS-Lindgren EMC optically coupled field...
FIND OUT MORE