DT4254 DIGITAL MULTIMETER

DT4254 DIGITAL MULTIMETER

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4254 is a pocket-sized digital multimeter...

Description

The Hioki DT4200 Digital Multimeter Series consist of a complete lineup of 9 models ranging from professional to industrial to pocket meters, delivering a super fast response rate and safety features that take electrical testing to a higher level. The DT4254 is a pocket-sized digital multimeter designed specifically for electrical work requiring optimal safety, with ±0.3% DC V accuracy and wide 40Hz to 1kHz AC V bandwidth.

Basic specifications (Accuracy guaranteed for 3 years, Post-adjustment accuracy guaranteed for 3 years)

Voltage detectionN/A

DC Voltage range 600.0 mV to 1000.0 V (isolated), 5 ranges, Basic accuracy: ±0.3 % rdg. ±3 dgt.
AC Voltage range 6.000 V to 1000.0 V, 4 ranges, Frequency characteristics: 40 Hz – 1 kHz
Basic accuracy 40 – 500 Hz : ±0.9 % rdg. ±3 dgt. (True RMS, crest factor 3)
Auto AC/DCV Yes
Voltage detection Hi: AC40 V to 600 V, Lo: AC80 V to 600 V
Frequency range 99.99 Hz to 99.99 kHz, 4 ranges (limited by the minimum detectable voltage), Basic accuracy: ±0.1 % rdg ±1 dgt
Other functions Filter function, Display value hold, Auto hold, Max/Min/Average value display, Relative display, Auto-power save, USB communication (option)
Display Main and Sub displays: 4-digits LCD, max. 6000 digits, bar graph
Display refresh rates 5 times/s (Capacitance measurement: 0.05 to 5 times/s, depending on measured value, Frequency: 1 to 2 time/s )
Power supply LR03 alkaline batteries ×4, Continuous use: 130 hours (backlight OFF)
Dimensions and mass 84 mm (3.31 in)W × 174 mm (6.85 in)H× 52 mm (2.05 in)D, 390 g (13.8 oz) (including batteries and holster)
Accessories Test lead L9207-10 ×1, Holster ×1, Instruction manual ×1, LR03 alkaline battery ×4

Key Features

• The voltage measurement model, which is ideal for solar power system and power equipment
management, measures up to 1700 V DC (*1) during open voltage inspections
• Measure up to 10A with direct input

• Dual display lets you check voltage and frequency simultaneously

• Low-pass filter cuts high harmonics (when measuring inverter fundamental waveforms)

• USB communications function supports PC measurements (optional)

• Broad -25°C (-13°F) to 65°C (149°F) operating temperature range

*1 Your instrument can be used to measure voltages in excess of 1000 V DC if and only if both of the
following conditions are satisfied: 1. The circuit under measurement is isolated from the commercial
power grid. 2. The circuit under measurement is isolated from ground.

Application Notes