EMC-SET Precompliance Set

EMC-SET Precompliance Set

Product Overview

EMC precompliance sets

HAMEG offers product sets for your EMC precompliance measurements, which include all necessary instruments to analyse typical EMC problems. Depending on your requirements, you can choose between a 1 GHz and a 3 GHz combination.

1 GHz HMS-SET1

  • Spectrum analyzer HMS-X incl. HMS-EMC option
  • Probe set HZ530
  • Line impedance stabilization network (LISN) HM6050-2
  • HMExplorer software

3 GHz HMS-SET2

Differences to SET1:

  • HMS-3G option additional
  • 3 GHz probe set HZ540 instead of HZ530

Not only do unexpected results in test labs during EMC compliance measurements translate into extra costs, quite often they also cause a substantial delay for your project. HAMEG offers effective and cost-effi cient tools for EMC precompliance measurements which allow you to successfully prevent possible surprises before the actual onset of a problem.

Our HMExplorer software for your EMC measurements is included with every HMS-X spectrum analyzer with activated EMC option.

Category:

Key Features

  • Frequency range: 100 kHz to 1.6 GHz/3 GHz*1
  • Spectral purity greater than -100 dBc/Hz (at 100 kHz)
  • SWEEP from 20 ms to 1000 s
  • Detectors: auto-, min-/max.-peak, sample, RMS, average, quasi-peak*2
  • Miscellaneous marker/Δmarker and peak functions
  • Tracking generator*3
    1. Frequency range: 5 MHz to 1.6 GHz/3 GHz*1
    2. Output level: -20 dBm to 0 dBm
  • Directly export data to USB flash drive, RS-232/USB dual interface
  • for remote control
  • Fanless design and fast boot time

*1 with HMS-3G (HV212) option

*2 with HMS-EMC (HV213) option

*3 with HMS-TG (HV211) option

Application Notes

Manufacturer

Downloads

There is no technical specification to download at this time, if you would like more information regarding this product please click here