Hioki 9010-50 CLAMP ON PROBE

Hioki 9010-50 CLAMP ON PROBE

Hioki current sensors are best-in-class devices for accurately capturing a wide range of current levels. The Hioki 9010-50 is a multi-range 500A AC voltage output clamp sensor for capturing waveforms with DMMs. Measure AC current on live power lines without needing to cut the wire.

Basic specifications (Accuracy guaranteed for 3 years, Post-adjustment accuracy guaranteed for 3 years)

Rated current 10 A to 500 A AC, 6 ranges
Accuracy ±2 % rdg. ±1 % f.s. (45 to 66 Hz)
Frequency characteristics Add to amplitude accuracy for frequencies from 40 to 1 kHz: ± 6 % rdg. (at 10 A and 20 A range)
± 3 % rdg. (for 50 A range and above)
Output rate 0.2 V AC f.s. (f.s. = setting rage)
(Connect to a voltage input device providing a high input impedance of 1 MΩ)
Max. allowable input 150 A rms continuous (10/20/50 A ranges)
400 A rms continuous (100/200 A ranges)
650 A rms continuous (500 A range)
(For 40 Hz to 100 Hz: 100 %, and for 100 Hz to 1 kHz: within 50 % of derating)
Max. rated voltage to earth 600 Vrms (50/60 Hz, CAT III)
Core diameter φ46 mm (1.81 in)
Dimensions and mass 78 mm (3.07 in)W × 188 mm (7.40 in)H × 35 mm (1.38 in)D, 420 g (14.8 oz), cord length: 3 m (9.84 ft)
Accessories Instruction manual ×1

Category:

You may also like…

Key Features

• Economical clamp sensors for waveform recording with Memory HiCorders

• Choose from up to six general-purpose ranges

Application Notes