LRX Series One Line Single Phase Filters

Product enquiry for LRX Series One Line Single Phase Filters

More InfoQuote

  • ETS-Lindgren’s One Line Single Phase Filters are individual, stand-alone single circuit filters from our LRX series of power line filters. ​​ETS-Lindgren manufactures UL Listed power line filters in a variety of mechanical configurations to meet your requirements. The basic, general purpose filter is the LRX series.

    The One Line Single Phase Filters are available in two styles. The Style 2 (S2) type case configuration is designed for direct installation on a shielded room, whereas the Style 3 (S3) type case configuration is designed for installation within a shielded filter panel. Style 3 filters are often supplied as individual replacement filters for installation within the LPRX and LFPRX filter panels. The case configurations for Style 2 and Style 3 filters are shown below under Product Charts.

    The LRX series of power line filters are designed for 277 volt line-to-ground, 480 volt line-to-line, 0 to 60 Hz applications. However, these filters can also be used for lower voltage ratings, such as 120/208 volts, with no adverse effect.

    Electrical Specifications

    Model ​Stopband Insertion Loss ​Current Rating
    LRX-1005- ​​100 dB, 14 kHz to 40 GHz ​5 A
    ​LRX-1010- ​​100 dB, 14 kHz to 40 GHz 10 A
    ​LRX-1030- ​​100 dB, 14 kHz to 40 GHz 30 A​
    ​LRX-1050- ​​100 dB, 14 kHz to 40 GHz ​50 A​
    ​LRX-1060- ​​100 dB, 14 kHz to 40 GHz ​60 A​
    ​LRX-1110- ​​100 dB, 14 kHz to 40 GHz 100 A​
    ​LRX-1150- ​​100 dB, 14 kHz to 40 GHz 150 A​
    LRX-1200- ​​100 dB, 14 kHz to 40 GHz 200 A​
    LRX-1225- ​​100 dB, 14 kHz to 40 GHz 225 A​
    ​LRX-1250- ​​100 dB, 14 kHz to 40 GHz 250 A​
    ​LRX-13001 ​100 dB, 14 kHz to 40 GHz ​300 A
    ​LRX-1400- ​100 dB, 14 kHz to 40 GHz ​400 A

    NOTE: For Installation on shield, filters can be ordered with penetration kit. Add “/PEN” to model numbers

    1 Not UL Listed

Key Features

  • Part of Our LRX Series of Filters
  • Designed for 277 volt line-to-ground, 480 volt line-to-line, 0 to 60 Hz Applications
  • Manufactured to the Most Current Version of UL-1283
  • In accordance with the Low Voltage Directive
  • LRX Power Line Filters meet the following standards:
    MIL-F-15733
    • MIL-STD-220C
    • UL 1283 5th ed.
    • IEC 60939
    • LVD (2006/95/EC)

Application Notes