Hioki CT6875A AC/DC Current Sensor

Hioki CT6875A AC/DC Current Sensor

Hioki pull-through AC/DC current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes.

The CT6875A is a DC to 2MHz/500A sensor, ideal for capturing current signals from switching power supplies, inverters, power conditioners and other next generation devices. CAT III 1000 V

Basic specifications

Rated current 500 A AC/DC
Max. allowable input Within the derating range, up to ±1500 Apeak (design value) allowed at 40°C or less for 20 ms or less
Frequency bandwidth Amplitude: DC to 2 MHz (CT6875), DC to 1.5 MHz (CT6875-01)
Phase: DC to 1 MHz
Basic accuracy (DC, 45 Hz ≤ f ≤ 66 Hz) Amplitude: ±0.04 % rdg. ±0.008 % f.s., Phase: ±0.1°
Output voltage rate 4 mV / A rated (This device outputs AC+DC voltage via the Sensor Unit. Use with voltage input equipment with high input impedance such as 1 MΩ)
Max. rated voltage to earth 1000 V AC/DC (50/60 Hz, CAT III )
Core diameter φ 36 mm (1.42 in)
Operating temperature, humidity -40°C to +85°C, 80% RH or less (with no condensation)
Power supply Power suppled via the Power Analyzer PW6001, PW3390, or Sensor Unit CT9555, CT9556, CT9557
Max. rated power 7 VA
Dimensions and mass 160mm W × 112mm H × 50mm D, CT6875: 800g, cable length 3m, CT6875-01: 1100g, cable length 10m
Accessories Instruction manual ×1, Mark bands ×6, Operating precautions ×1

Compatible models

Compatible models CT6875
Power Analyzer PW6001, PW3390 Ok
Power Analyzer 3390 Attention (Requires CT9901)
Power HiTester 3193 series Attention (Requires CT9901)
Current Unit 8971 Attention (Requires the 9318, CT9901)

Category:

You may also like…

Key Features

  • Strengthened shield improves noise resistance to accurately measure current buried in noise
  • Flat frequency characteristics and CMRR performance to achieve high accuracy measurement
  • More enhanced environmental resistance performance than ever before with operating temperature range of -40 to 85°C
  • Basic accuracy of ± 0.04% and phase ± 0.1°
  • Good frequency characteristics over wide band of DC to 2 MHz (amplitude) and DC to 1 MHz (phase)
  • Ideal for advanced fields such as photovoltaics and fuel cells to evaluate the charge / discharge of batteries and secondary side of inverters
  • Connect with oscilloscopes or Hioki Memory HiCorders (using SENSOR UNIT) to monitor waveforms

Application Notes