Hioki 3274 Clamp On Probe

Hioki 3274 Clamp On Probe

Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes.

The Hioki 3274 supports wide DC to 10 MHz bandwidth signals and 150A of continuous high input, and is ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers.

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 6 months)

Frequency bandwidth DC to 10 MHz (-3 dB)
Rise time 35 ns or shorter
Noise level 25 mA rms max. (bandwidth limited to 20 MHz)
Continuous allowable input 150 A rms (requires derating at frequency)
Max. allowable peak input 300 A peak (non continuous)
500 A peak (pulse width: 30 μs or shorter)
Amplitude accuracy (30 min. after power-on, after degaussing and zero-adjustment) ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 150 A rms)
±2.0 % rdg. (DC, 45 to 66 Hz, 150 A to 300 A peak)
Output rate 0.01 V/A *Device output is terminated internally. Use with a device having a 1 MΩ input resistance or higher.
Measurable conductors Insulated conductor
Core diameter  φ 20 mm (0.79 in)
Power supply ±12 V ± 1 V, 5.5 VA max.
Dimensions and mass 176 mm (6.93 in)W × 69 mm (2.72 in)H × 27 mm (1.06 in)D, 500 g (17.6 oz)
Sensor cable BNC terminal: 2 m (6.56 ft), Power cable: 1 m (3.28 ft)
Accessories Instruction manual ×1, Carrying case × 1

Category:

You may also like…

Key Features

  • Waveform observation across a wide band from DC to MHz
  • Connects directly to oscilloscope or Memory HiCorder BNC input terminal *1

*1 Connecting the device’s metal BNC terminal to a Memory HiCorder’s plastic BNC terminal may damage the plastic terminal or cause it to become misshapen.

Application Notes