Transformers
Products found: 125
-
The 276x series provide automatic current and voltage transformer testing with modern, fully automatic instruments for fast, accurate measurement of...FIND OUT MORE -
The precision test cell type 2903 measures the dielectric properties of liquid insulants such as insulating oil, it determines the dissipation factor...FIND OUT MORE -
The test cell is used for dielectric tests on solid test samples together with the measuring bridge 2830/2831. It determines dissipation factor tan...FIND OUT MORE -
The 3370 is a series of SF6 insulated, highly stable capacitors and is used together with a power factor / tan d measuring instrument as a comparison...FIND OUT MORE -
The 3388 is a compressed gas capacitor & is used as standard capacitance in bridge circuits to measure dielectric dissipation factor (tan delta),...FIND OUT MORE -
The programmable electronic current burden, type 3691 is designed for efficient testing of current instrument transformers. It replaces traditional...FIND OUT MORE -
The programmable electronic voltage burden, type 3695 is designed for efficient testing of voltage instrument transformers. It replaces traditional...FIND OUT MORE -
Dissipation factor tan d standards are designed for checking the accuracy of capacitance and dissipation factor measuring instruments. A tan d...FIND OUT MORE -
The 3730 is a compactly designed 12 kV SF6 reference capacitor with seven calibrated, manually selectable values of tan delta (power factors) A fast...FIND OUT MORE -
The high precision Current Comparators (current transformers) are used to convert high currents to a lower, measurable level. The errors of...FIND OUT MORE -
The type 5287 extends the performance of the Capacitance -tan d field test sets and MIDAS 2880 and MIDAS 2881. It adds an additional high current...FIND OUT MORE -
The 5288a is a manual tunable 12 kV, 40 kVA inductor, to be used with the MIDAS 2881 system to address higher DUT capacitance, typically used on...FIND OUT MORE -
The 5289 provides a motorized tuneable 15 kV, 100 kVA inductor coil to be used together with the MIDAS 2881 system and increase its test object...FIND OUT MORE -
Chroma’s 63200A series high power electronic loads with built in digital signal microprocessors (200MHz) provide optimal speed and control...FIND OUT MORE -
The type 6835 test cell allows tests on the dielectric properties for liquid insulants, e.g. determines dissipation factor tan d or power factor...FIND OUT MORE -
ETS-Lindgren’s Model 7405 E & H Near Field Probe Set is a passive, near field probe set designed as a diagnostic aid for locating and...FIND OUT MORE -
The capacitors are of sturdy and rugged and are for indoor operation. Insulation is reinforced epoxy fiberglass tube filled with oil. Decouples...FIND OUT MORE -
The coupling capacitor type 9230/25/1-PD includes a high voltage capacitor, a high voltage filter and a measuring impedance (modified AKV 9310) in a...FIND OUT MORE -
The coupling capacitor type 9230/30/9-PD includes a high voltage capacitor, a high voltage filter and a measuring impedance in a compact design. It...FIND OUT MORE -
The capacitors are of sturdy and rugged and are for indoor operation. Insulation is reinforced epoxy fiberglass tube filled with oil. Decouples...FIND OUT MORE -
The divider is sturdy and rugged and for indoor operation. The insulator is a reinforced epoxy fiberglass tube filled with oil. It consists of a...FIND OUT MORE -
The AKV 9310 series of quadripole (measuring impedance) is a fully passive measurement system optimized for use with the DDX 9121b series of partial...FIND OUT MORE -
The AKV 9330 has been specially designed for Partial Discharge (PD) testing of power capacitors. It addresses two major problems associated with...FIND OUT MORE -
The AKV 9360 is a measuring impedance (sometimes also called coupling device or quadripole). It is a fully passive and optimized for use with the DDX...FIND OUT MORE -
An Architectural Shielded Enclosure is made using Flectron® materials, which are metallized fabrics whose primary application is electromagnetic...FIND OUT MORE -
ETS-Lindgren Auto-Latching Door System for EMI/RFI Shielded Rooms maintain the highest level of shielding effectiveness in EMI/RFI enclosures whilst...FIND OUT MORE -
The Chroma 17010H Battery Reliability Test System is a high-precision charge and discharge test system designed specifically for high current/high...FIND OUT MORE -
The AN-Series is a type of artificial network designed to simulate the electrical characteristics of the power network in hybrid and electric...FIND OUT MORE -
Damped-capacitive impulse voltage dividers series CR are optimized for high dynamic behaviour and can be used to measure full and tail chopped...FIND OUT MORE -
Damped-capacitive impulse voltage dividers series CS are optimized for high dynamic behaviour and can be used to measure full and tail chopped...FIND OUT MORE -
Standard modular or custom DEI screen industrial shielding enclosures provide the highest shielding performance available in a “hear-through,...FIND OUT MORE -
A New Standard in Knife Edge Door Technology for EMI/RFI Shielded Enclosures. To improve on the quality and performance of the traditional knife edge...FIND OUT MORE