Hioki 3273-50 Clamp On Probe

Hioki 3273-50 Clamp On Probe

Hioki flat bandwidth current probes are best-in-class current sensors for use with Memory HiCorders and high performance oscilloscopes.

The Hioki 3273-50 offers a wide DC to 50 MHz bandwidth and 30A of continuous input, and is ideal for capturing transient current signals from switching power supplies, inverters, and motor controllers.

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 6 months)

Frequency bandwidth DC to 50 MHz (-3 dB)
Rise time 7 ns or shorter
Noise level 2.5 mA rms max. (bandwidth limited to 20 MHz)
Continuous allowable input 30 A rms (requires derating at frequency)
Max. allowable peak input 50 A peak (non continuous)
Amplitude accuracy (30 min. after power-on, after degaussing and zero-adjustment) ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 30 A rms)
±2 % rdg. (DC, 45 to 66 Hz, 30 A rms to 50 A peak)
Output rate 0.1 V/A (use with a device having a 1 MΩ input resistance or higher)
Measurable conductors Insulated conductor
Core diameter Φ  5 mm (0.20 in)
Power supply ±12 V ±0.5 V, 5.6 VA max.
Dimensions and mass ±1.0 % rdg. ±1 mV f.s. (DC, 45 to 66 Hz, 0 to 30 A rms)
±2 % rdg. (DC, 45 to 66 Hz, 30 A rms to 50 A peak)
Sensor cable BNC terminal: 1.5 m (4.92 ft), Power cable: 1 m (3.28 ft)
Accessories Instruction manual ×1, Soft case × 1

Category:

You may also like…

Key Features

  • Waveform observation across a wide band from DC to MHz
  • Connects directly to oscilloscope or Memory HiCorder BNC input terminal *1
  • High S/N characteristics enable the measurement of 10 mA order current waveforms (3273-50, 3276)

*1 Connecting the device’s metal BNC terminal to a Memory HiCorder’s plastic BNC terminal may damage the plastic terminal or cause it to become misshapen.

Application Notes