91550-1 CURRENT PROBE

91550-1 CURRENT PROBE

Frequency Range: 20 Hz – 100 MHz

The Model 91550-1 current probe and 91550-1L current probes are extremely broad frequency range probes covering 20 Hz to 100 MHz.

The 91550-1 and 91550-1L current probes have a calibration available down to 20 Hz which makes them ideal test equipment for such test methods as MILSTD-462 CEO1 and RSO1. In particular, the newer CEO1 limits which are dependent on EUT current/voltage requirements are more stringent than the older fixed limit CEO1 requirement. Coupled with the widespread use of microwave spectrum analysers (such as the HP8566) with degraded sensitivity below 100 Hz, sensitivity at low audio frequencies is very important. Use of the 91197-1 current probes with the HP8566B allows current measurements below 80 dBA at 20 Hz. This is more than 6 dB below MILSTD-461 and related conducted emission limits, including common mode limits on submarines.

The Model 91197-1 EMC probe family has a 3.18 cm (1.25 in) window, making it suitable for measurements on most power cables (AWG 4/0 cable, good for several hundred Amps, is 12.7 mm (0.5 in) diameter, exclusive of insulation.) Probe saturation current is compatible with the current carrying capacity of wires placed in its window.

Electrical Specifications

Frequency Minimum 10 kHz
Frequency Maximum 100 MHz
Load Impedance 50 Ω
Maximum Primary Current Amps 400 Hz: 350
DC-60 Hz: 350
Pulse: 100
RF(CW) : 42
Transfer Impedance 5 Ω

Category:

Key Features

  • For Standards Testing and Pre-compliance Applications
  • Measures RF Current Without Direct Connection
  • Two year warranty
  • Window DIA 3.18 cm

Application Notes

Manufacturer