5402 GTEM! Test Cell

5402 GTEM! Test Cell

ETS-Lindgren’s GTEM!™ Test Cell enables users to perform radiated emissions and radiated immunity tests in less time than at either an OATS or in a chamber. Tests can be performed quickly and accurately throughout the product life cycle.

Beginning with design qualification testing and moving through to pre-compliance testing, full compliance testing and production sampling, ETS-Lindgren GTEM!™ Test Cell is a time saving device for your test lab. A typical radiated emissions test (10,000 point scan) can be completed in 15 minutes or less, while a typical radiated immunity test can usually be completed in half the normal time.

The GTEM!™ Test Cell is based on experience, not experimentation. Originally developed in the EMC Baden (Switzerland) labs of ABB, the cell has been accepted in the EMC community for more than 10 years, and is field proven daily at more than 400 installations worldwide. Measurements made with a GTEM!™ Test Cell are accepted for final compliance demonstration by the FCC for Part 15 & 18 radiated emissions testing, and comply with IEC 61000-4-3 Annex D for immunity testing.

The GTEM!™’s unique tapered shape, offset septum, resistive termination network and absorber- lined back wall remove performance limitations of TEM cells and boxy enclosures. Electromagnetic wave and RF current termination are smooth and controlled. Field uniformity is +/- 3 dB up to 1 GHz, and +/-4 dB above 1 GHz.

Physical Specifications

Maximum Septum Height3 250.0 mm   (9.84 inches)
Outer Cell w/Base Dimension(H)1 0.5 m   (1.64 ft)
Outer Cell w/Base Dimension(L) 1.4 m   (4.59 ft)
Outer Cell w/Base Dimension(W) 0.75 m   (2.46 ft)

Electrical Specifications

Feed Connector Type cw 7/16 DIN to N Adapter
Field Uniformity f < 1 GHz, 0 -6dB
Frequency 9 kHz – 5 GHz (RE) 1
DC – 20 GHz (RI) 2
Input Impedance 50 Ω
Maximum CW Input 50 W
Shielding Effectiveness 10 kHz – 1 GHz
From Internal E-Fields 80 dB min
VSWR Maximum All Other Freq < 1.50:1
Characteristic Freq < 1.75:1
VSWR Typical All Other Freq 1.30:1
Characteristic Freq3 1.75:1

Category:

Key Features

  • Post Production
  • For all Phases of EMC Testing – Design Qualification – Pre-Compliance – Full Compliance IEC 61000-4-3 ANSI C63.4

Application Notes

Manufacturer